180-day warranty
Every battery replacement is covered for 180 days — parts and labour. If the new battery fails to perform within that window, we replace it free of charge. ISO 9001:2015 certified service centre.
Read the full warranty policyLast updated May 2026
Bluetooth Speaker Water Damage Repair
Bluetooth speaker in water, beer, pool, salt water, or rain? Board-level recovery for JBL, Bose, Sony, Marshall and all major brands — ultrasonic cleaning, corrosion removal, IC replacement where needed. Most settings and pairing lists preserved. 2–4 days to diagnose properly, then a written quote. 6-month warranty + money-back if we can't fix it.
- Board-level recovery
- Ultrasonic + schematic diagnosis
- 6-month warranty + money-back
- In-house board lab since 2012
Or call us directly: 080 4710 3303
Emergency first aid
Just spilled? Do these 5 things in the next 5 minutes.
Every minute the speaker stays powered after liquid contact = more components corrode. The single biggest factor in recovery is how fast you act. Follow these 5 steps before you do anything else, then call us.
- 1. Turn the speaker off — now
- 2. Wipe external surfaces dry
- 3. Remove grilles if possible (don't force)
- 4. Don't apply heat — no hairdryer
- 5. Call iTweak for a diagnostic
Get an exact water damage repair quote
Water damage repair pricing varies enough that a quote upfront would be guesswork. Share your iPhone model and a technician calls back with the exact price — no obligation, no spam.
Signs of Bluetooth speaker water damage
Water damage isn't always immediate. Sometimes the speaker works fine for days, then suddenly fails as corrosion spreads on the logic board. Six signs to watch for.
Won't turn on at all
Liquid shorted the power-management IC or the main processor. Won't respond to charger or buttons. Board-level repair is the only path back.
Won't charge (even with a new battery)
The charging IC on the logic board has corroded. Battery replacement won't fix this — we need to clean or replace the charging IC.
Sound is distorted or crackling
Drivers sound fuzzy or crackle even after drying. Water damaged the voice coils or corroded the amplifier IC. Sometimes drivers need replacement, sometimes it's the amp.
Bluetooth won't pair
Pairing mode activates but no devices see the speaker. Corrosion on the Bluetooth module or antenna. Common after salt-water exposure (beach, pool).
Buttons don't respond
Power/volume/pairing buttons do nothing. Tactile switches on the board have corroded or the button-input IC has failed. Board-level cleaning or IC replacement needed.
Speaker heating up at idle
Enclosure feels abnormally warm when not in use or while charging. Internal short circuit from corroded components draining current. Stop using it — keep going and you risk the battery and the rest of the board.
What iTweak does for water damage — and what most shops don't
Most repair shops can't do water-damage recovery on Bluetooth speakers — they don't have ultrasonic baths, schematics, or board-level skills. They either decline the job or quote a full board swap that loses your pairing list and settings.
Recommended
iTweak's water damage workflow
Ultrasonic clean + schematic-led trace + chip-level fix
- Initial response
- Diagnostic and quote within 2-4 days
- Cleaning method
- Ultrasonic bath + isopropyl rinse
- Damage assessment
- Schematic + thermal-imaging trace
- IC-level repair
- Yes — micro-soldering on affected chips
- Driver replacement
- Yes — if water damaged voice coils
- Money-back if unrepaired
- Yes — diagnostic time is on us
- Warranty
- 6 months, parts + labour
Available at every iTweak storefront
We don’t fit
Most repair shops
Decline the job or suggest buying new
- Initial response
- Often refuse to attempt
- Cleaning method
- Wipe with cloth at best
- Damage assessment
- Visual only — miss corrosion
- IC-level repair
- No — they don't do board-level
- Driver replacement
- Rarely — lack OEM drivers
- Money-back if unrepaired
- Rare
- Warranty
- Often won't warranty water damage at all
How board-level water damage recovery works
Different from a part-swap repair. Diagnosis takes 2–4 days because corrosion can be in multiple components and each one needs to be traced. Once the quote is approved, repair typically lands in 1–2 days.
1Don't power on — bring it to us
If the speaker is currently off, leave it off. If it's on, power it down. Bring it to iTweak as soon as possible — every hour of power-on time = more corrosion.
2Open and clean
We open the device, remove the battery, and clean every component with isopropyl alcohol and ultrasonic baths. This alone resolves 40% of liquid-damage cases — sometimes the corrosion hasn't spread to the ICs yet.
3Schematic-led diagnostic
Once dry and clean, we run a full functional test and trace every failing subsystem on the schematic. Power, charging, Bluetooth, audio, buttons — each rail measured individually. This is the 2–4 day step.
4Quote and approve
Written quote with exact ICs/components needing repair. You approve before we touch anything irreversible. Money-back guarantee if we can't restore function.
5Chip-level repair and test
Micro-soldering replaces failed ICs (charging IC, Bluetooth chip, amplifier, power IC, etc). Reflow re-seats cracked solder joints. Full functional test. Most settings and pairing lists preserved.
Doorstep, pickup or walk-in
Three ways to get it fixed. Same parts, same warranty, same technicians — pick what works for you.
Anywhere in India
ETA: 24–48 hours round-trip
Free insured pickup by our courier partner. Device lands at our Bangalore lab within 24 hours, ships back the same day or next, fully tested under warranty.
- Insured packaging supplied; just hand it over
- Live tracking at every leg of the trip
- Free pickup AND free return — no logistics charge
- Same warranty as walk-in service: 90 days, parts and labour
If it’s not the battery, you don’t pay for the swap
Our 80-point Phonecheck diagnostic runs before any disassembly. If the issue turns out to be elsewhere — charging IC, board fault, software — we tell you, refund the booking, and quote the actual fix. No upsells.
- Pre-repair diagnostic on every booking
- Written quote before any work begins
- 100% refund if mis-diagnosed
- No part used without your sign-off
What our customers say
4.2 · 704+ Google reviews 4.8 · Justdial
“The technician arrived punctually at my residence, thoroughly explained the issue, and completed the iPhone 13 battery replacement in about 30 minutes. Seamless and professional.”
Sriram SrinivasaniPhone 13 · Battery · Bangalore“These guys worked like magic. Apple said the only fix for my cracked iPad screen was to replace the entire unit — which I refused to believe. iTweak proved them wrong.”
Niranjan SridhariPad · Screen · Bangalore“Booked a home appointment, the technician came on time and replaced the screen within 30 minutes — working great, no issues. Would recommend to anyone who wants to save money.”
Mukul KumarDoorstep · Screen · Bangalore“Got my Apple Watch battery replaced through iTweak in Bangalore — the entire experience was truly seamless and professional.”
Harshan KumarApple Watch · Battery · Bangalore“Quick same-day screen replacement for my iPhone 17 Pro Max. Highly recommend.”
Adithya SarmaiPhone 17 Pro Max · Screen · Bangalore“Best place for iPhone repair — genuine parts at an affordable price. They replaced the back panel of my iPhone 15 and I had it back within 4 hours.”
Rakesh PateliPhone 15 · Back glass · Bangalore
Find us
Storefronts in Bangalore, Mumbai and Chennai. Doorstep service across all three. Free pickup anywhere else in India.
Marathahalli, Bangalore
35 Varthur Road, Marathahalli, Bangalore 560037
- 10am – 7pm · Mon–Sun
- 080 4710 3303
- Doorstep
- Pickup
- Walk-in
Andheri West, Mumbai
Andheri West, Mumbai 400053
- 10am – 7pm · Mon–Sun
- 080 4710 3303
- Doorstep
- Pickup
- Walk-in
T. Nagar, Chennai
T. Nagar, Chennai 600017
- 10am – 7pm · Mon–Sun
- 080 4710 3303
- Pickup
- Walk-in
FAQ
Rice myth, settings preservation, charging after spill — the questions our board team hears daily.
Water damage repair cost varies depending on what the diagnostic finds — sometimes a clean and a single IC swap is enough (₹2,000–₹3,500), sometimes multiple ICs or drivers need replacement (₹4,000–₹8,000). We diagnose in 2–4 days and send a written quote before any irreversible work. You only pay for the actual fix, and if we can't restore your speaker we don't charge for the repair attempt.
No — this is one of the biggest myths in electronics repair. Rice draws moisture slowly and unevenly, often leaving residue inside the device. Silica gel packets (the ones that come with new electronics, shoes, vitamins) are much better. Best option: bring it to us — we have ultrasonic baths and isopropyl alcohol that remove water and salt residue properly.
Absolutely not. Charging a wet speaker forces current through any liquid bridges between components — that's how clean speakers turn into board-replacement jobs. Power it off, dry the outside, and bring it to us before charging.
Yes — in most cases. iTweak's board team has been doing water-damage recovery since 2012. The earlier we see the speaker after a spill, the higher the recovery rate. After 24+ hours of corrosion progression, more components are usually affected, but even then most speakers can be saved with chip-level repair.
Usually not — our chip-level approach preserves the flash memory (where your pairing list, EQ settings, and firmware live). We only need to replace the components that corroded, not the memory. If the flash chip itself is damaged (rare), the pairing list may be lost, but we discuss this before proceeding.
Partially. The housing seals and grille adhesive are replaced as part of the reassembly. However, IP ratings (IP67, IPX7) degrade after any repair — the brand's spec assumes factory-sealed components. We can restore the seal, but treat the speaker as splash-resistant rather than IP-rated going forward.
Diagnosis: 2–4 days. We don't rush this — corrosion can be in multiple places and each needs to be traced. Once you approve the written quote, the actual repair is typically 1–2 working days. Total round-trip from drop-off to return is usually 4–6 days.
If our board team can't restore function, you don't pay for the repair attempt. Diagnostic time is on us. This is part of our money-back guarantee — we'd rather tell you honestly than charge for an unsuccessful repair. 6-month warranty applies once we DO fix it.
Available now · 10am – 7pm · Mon–Sun