Apple iPad Screen Repair and Replacement

It is important to choose a replacement service center that provides complete information when you need to repair your Apple iPad screen.

Cost and Warranty Period for broken screens or displays of iPad models

The cost of replacing the iPad screen starts from 4300 INR. Depending on the model of the iPad, the cost of replacing the display is listed below. There are still a few Apple iPads available without an integrated LCD and touchscreen, unlike the newer models. There are separate replacement display screens for iPad 2, iPad 3, iPad 4, iPad Mini 1, iPad Mini 2, iPad Air 1, iPad Mini 3, and iPad 5. The LCD and Touchscreen of some Apple iPad models, such as iPad Air 2, iPad Mini 4, and iPad Pro, are fused together as one unit. Therefore, if the touchscreen is damaged, the whole unit needs to be replaced.

Circumstances under which the Apple iPad screen needs replacement

• Unresponsive touch screen 
• The screen has cracks or is chipped 
• The LCD has been damaged 
• The screen has lines on it 
• Liquid damage 
• The brightness levels of the screen are very low 
• Intermittent operation of the touch panel
• ​​The panel is pulling out of the screen 
• Manufacturing defect with the touchscreen, LCD, or display connector

Here are some of the known issues with the iPad Touchscreen:

• Ensure that there are no dead spots on the touchscreen by using any app that allows you to draw and then testing every inch of the touchscreen.
• Symptoms of touch syndrome can be tested by turning off the auto screen lock feature in settings and leaving the iPad on its home page. If the iPad starts opening apps on its own or if it suddenly swipes to another page on the home screen, then you will know if it has touch syndrome. 

In the event that your iPad has any of the problems listed above, follow these steps:

• You can hard reset your iPad by holding the power and home buttons together until you see an Apple logo. When it shows the home screen, test it again.
• Ensure the touch screen ribbon cable is inserted properly in the connector. Make sure the cable is all the way in. Reassemble the iPad & test it again.

If the above two steps don't work, then you'll have to replace the iPad Touchscreen.

If you would like to verify the functionality of your display screen before sending it in for replacement, you can do the following:

Clean the display: If the touch function on your iPad is not working or is intermittent, you may want to try wiping the screen with a microfiber cloth. For cleaning the display, use isopropyl alcohol. This is to remove any dirt or moisture that may be present on the display. Keep your fingers dry while using your iPad so that moisture or dirt cannot get inside.

Hard Reset: Reset your iPad to ensure that it is not affected by a software issue. Please refer to the following link for instructions on how to perform a hard reset: https://support.apple.com/en-us/HT212951

‍

If you are uncertain whether you need an iPad screen replacement or if you have more questions regarding the service, we will be glad to answer any questions you may have.